Wind deflector installation Installing on the windscreen |
1. Carefully clean seals and make sure nothing sharp remains in the seals. Carefully remove the stickers from the product. |
2. First, fasten the product’s left side between the seals. On the face of it, the Volvo V70 wind deflectors seemed to be larger and fix more densely. If necessary, with a thin piece of plastic press the seals into place. |
3. Carefully, and while slightly bending the product, fasten the right side into place between the seals. |
4. Carefully fasten the product’s entire middle section between the seals. Make sure the product is firmly between the seals. |
Installing on the rear window |
1. Carefully clean seals and make sure nothing sharp remains in the seals. Carefully remove the stickers from the product. |
2. Fasten the product’s right corner into between the seals while making sure the left side slides into the middle of the window’s left side seals. Then carefully push the product up from both corners. |
3. Check that the product is firmly between the seals. |
4. Place the clamps between the product and the seals so that the clamp’s studded side presses onto the seal. Fasten one clamp on the left and the other on the right. |
The product has now been installed. |
During the next few days, the windows may close more tightly as the window seals take time to adapt to the wind deflector. If you encounter problems during the installation, please call us during work days from 8 to 18 on 044 914 2528 or email us at tuuliohjaimet@gmail.com. |